Kestrel 5700/Ruger 5700 Ballistics Meter to Kestrel 5700 Elite/Ruger 5700 Elite Upgrade - with Connection Accessory

Make sure Bluetooth^® is turned ON on your phone. On the Kestrel, go to the Main Menu->Bluetooth and turn it ON. Press the center button while Bluetooth is highlighted and check to ensure that Conct is set to PC/Mobile and it shows Available. Next go to the application that you are connecting with on your phone and select the Kestrel as the device you would like to connect with. Please note: if you do not find the Kestrel on your phone’s “standard” Bluetooth connection screen, that does not mean that the Kestrel is not working properly. Please first go to the application and try to connect through the application. The Kestrel should connect.

All models of the Kestrel 5000 Series have optical data ports that can be seen through the openings of the battery door. A USB Data Transfer Cable can be purchased separately, which plugs directly into the back of the Kestrel and extends to a USB port in your computer.  You will NOT be able to connect a non-LiNK model unit to a mobile device (e.g., any device without a USB port).

These programs handle uploading the weather data from the Kestrel to a specific device. This weather data can then be exported into MS Excel. You can also update your firmware any of these programs. Visit the Kestrel LiNK Software and Apps page to learn more.

As can be seen in the pictures below, place your thumb on the bottom of the unit and slide the latch from the “Locked” to the “Unlocked” position. The battery door should pop up enough that you can remove it. If you have trouble opening the battery door, some slight pressure DOWN on the battery door itself with your other thumb may help release the latch.

First slide in the tab at towards the top of the unit, then gently press the bottom part of the battery door down until it snaps into place.  Ensure that the O-ring remains in place on the battery door when closing.

No. Since the Kestrel 5 Series meters utilize only one AA battery, there is no need to use the battery shim to separate two AAA batteries as in the previous version.

Yes. And you can now upgrade your Kestrel 5700 to the Elite version using the Kestrel LiNK Ballistics application. Simply connect your Kestrel to the iOS or Android version of the Kestrel LiNK Ballistics app. Select Upgrade in the top left corner. Enter you credit card information for the purchase and the upgrade should start after payment is completed. The upgrade will look similar to a firmware update.

No. Currently ONLY the Kestrel Sportsman Weather Meter with Applied Ballistics or the Kestrel 5700 Ballistics Weather Meter can be upgraded to the Kestrel 5700 Elite model.

All of the Kestrel 5000 series units have the Night Vision option in addition to the standard white backlight.  There is a menu selection that allows the customer to toggle between both options.

Wind Speed – NK sells factory calibrated replacement impellers that can easily be installed by the customer. NK recommends replacing the impeller every 2-3 years depending on usage.

Humidity – The Kestrel 5 Series and DROP data loggers employ a highly accurate, calibrated, digital humidity sensor. Based on the sensor manufacturer's specifications and NK testing, drift on this sensor over time is minimal and field recalibration is likely to degrade accuracy rather than improve it. Factory calibration to validate and certify accuracy at a minimum of two RH points is available from NK. Kestrel 5000 series units can also be recalibrated in the field using our kit RH Recalibration Kit . During the five-year warranty period, NK will repair, recalibrate or replace any Kestrel 5 Series or DROP which drifts more than +/-1% RH/year since the date of manufacture.

Temperature – The thermistor in the Kestrel 5 series should not need to be recalibrated. If you think your sensor is incorrect, please contact techsupport@nkhome.com

Pressure – The pressure in the Kestrel 5 series should not need to be recalibrated. If you think your sensor is incorrect, please contact techsupport@nkhome.com

Any of the LiNK Ballistics applications will allow you to transfer gun profiles to your Kestrel. So Kestrel LiNK Ballistics for iOS or Kestrel LiNK Ballistics for Android will allow you to use a mobile device to transfer gun profiles but you would need to have the LiNK (i.e., Bluetooth) model. If you are using a Windows computer, you can use the Applied Ballistic Profile Loader (Version 42 or higher).

NOTE : Please be aware that currently the Applied Ballistics Profile Loader cannot be used with Bluetooth for Kestrel 5700 devices; therefore you will need to purchase the USB Transfer cable to transfer files with a Windows PC.

Unfortunately we do not have a ballistics application that runs on a MAC.

You cannot upgrade the 5700 Elite as it doesn't have the processing power to run the analysis. You can upgrade your 5700X to include WEZ for $100. Please connect your unit to the Kestrel LiNK Ballistics app and you will see a pop up. Follow the prompts in the app to upgrade it.